NCR8250S Hard Disk/Floppy Controller Settings and Configuration
SYMBIOS LOGIC
NCR8250S
Data bus: | 32-bit, PCI |
Size: | Half-length, full-height card |
Hard drive supported: | Up to 15 SCSI interface drives |
Floppy drives supported: | None |
CONNECTIONS | |
Function | Location |
50-pin low-density SCSI interface - internal | J2 |
50-pin high-density SCSI interface - external | J3 |
USER CONFIGURABLE SETTINGS | ||
Function | Location | Setting |
SCSI single-ended active termination - enabled | E1 | closed |
SCSI single-ended active termination - disabled | E1 | open |
Note:You must disable SCSI termination when connecting both internal & external SCSI interfaces. | ||
My Books
