ADP60LIB/ADP60LIBF Hard Disk/Floppy Controller Settings and Configuration
SILICON VALLEY COMPUTER, INC.
ADP60LIB/ADP60LIBF
Data bus: | 16-bit ISA |
Size: | Half-length, Full-height card |
Hard drive supported: | 2 IDE(AT) interface drives |
Floppy drives supported: | 360KB, 720KB, 1.2MB, 1.44MB |
CONNECTIONS | |
Function | Location |
4-pin connector - drive active LED | P1 |
40-pin IDE(AT) interface connector | P2 |
34-pin control cable connector - floppy drive | P3 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Floppy drive interface enabled | E1 | open |
Floppy drive interface disabled | E1 | closed | |
| » | Dual speed floppy drive | E2 | open |
Single speed floppy drive | E2 | closed | |
| » | Floppy drive interface precompensation 187ns | E3 | open |
Floppy drive interface precompensation 125ns | E3 | closed | |
| » | Hard drive address 1F0 - 1F7h select | E4 | open |
Hard drive address 170 - 177h select | E4 | closed | |
USER CONFIGURABLE SETTINGS(CONTINUED) | |||
Function | Location | Setting | |
| » | Base memory address C800h select | E5 | open |
Base memory address CA00h select | E5 | closed | |
| » | 8KB BIOS select | E6 | open |
16KB BIOS select | E6 | closed | |
| » | On-board BIOS enabled | E7 | closed |
On-board BIOS disabled | E7 | open | |
| » | Factory configured - do not alter | E8 | pins 1 & 2 closed |
My Books
