SIDE - 2615 (REV. 1.1) Hard Disk/Floppy Controller Settings and Configuration

QUICK TECHNOLOGY, INC.

SIDE - 2615 (REV. 1.1)

Data bus:
16-bit, ISA
Size:
Three/quarter-length, full-height card
Hard drive supported:
Four IDE(AT) interface drives
Floppy drives supported:
Two 360KB, 720KB, 1.2MB, 1.44MB or 2.88MB drives

CONNECTIONS
Function
Location
34-pin floppy drive connector
J1
26-pin parallel port - internal
J2
40-pin primary IDE(AT) connector
J3
40-pin secondary IDE(AT) connector
J4
10-pin serial port 4 - internal
J5
10-pin serial port 3 - internal
J6
10-pin serial port 2 - internal
J7
10-pin serial port 1 - internal
J8
9-pin serial port 1 - external
J9
25-pin parallel port - external
J10
4-pin connector - drive active LED
JP1
Note: You can only use J8 or J9 at any time.

USER CONFIGURABLE SETTINGS
» Function
Location
Setting
»
IDE(AT) primary hard drive interface enabled
JP2/pins 1 & 2
closed
»
IDE(AT) primary hard drive interface disabled
JP2/pins 2 & 3
closed
»
IDE(AT) secondary hard drive interface enabled
JP3/pins 1 & 2
closed
»
IDE(AT) secondary hard drive interface disabled
JP3/pins 2 & 3
closed
»
Floppy drive interface enabled
JP4/pins 1 & 2
closed
»
Floppy drive interface disabled
JP4/pins 2 & 3
closed
»
Parallel port 1 IRQ 7 select
JP17/pins 1 & 2
closed
»
Parallel port 1 IRQ 5 select
JP17/pins 1 & 2
closed
»
Parallel port 2 IRQ 5 select
JP22/pins 1 & 2
closed
»
Parallel port 2 IRQ 7 select
JP22/pins 1 & 2
closed
»
IOCHRDY signal parallel port 1 EPP mode enabled
JP23/pins 1 & 2
closed
»
IOCHRDY signal parallel port 1 EPP mode disabled
JP23/pins 2 & 3
closed
»
IOCHRDY signal parallel port 2 EPP mode enabled
JP26/pins 1 & 2
closed
»
IOCHRDY signal parallel port 2 EPP mode disabled
JP26/pins 2 & 3
closed
»
Serial port 1 IRQ4 select
JP29/pins 1 & 2
closed
»
Serial port 1 IRQ3 select
JP29/pins 2 & 3
closed
»
Serial port 2 IRQ4 select
JP30/pins 1 & 2
closed
»
Serial port 2 IRQ3 select
JP30/pins 2 & 3
closed
»
Factory configured - do not alter
JP31/jumper 3
N/A
»
Secondary IDE IRQ15 select
JP33/pins 1 & 2
closed
»
Secondary IDE IRQ10 select
JP33/pins 1 & 2
closed

SERIAL PORT 1 CONFIGURATION
Address
JP5
JP6
»
3F8h (COM1)
pins 1 & 2 closed
pins 2 & 3 closed
»
2F8h (COM2)
pins 1 & 2 closed
pins 2 & 3 closed
»
3E8h (COM3)
pins 2 & 3 closed
pins 1 & 2 closed
»
Disabled
pins 2 & 3 closed
pins 2 & 3 closed

SERIAL PORT 2 CONFIGURATION
Address
JP7
JP8
»
2F8h (COM2)
pins 1 & 2 closed
pins 1 & 2 closed
»
3F8h (COM1)
pins 1 & 2 closed
pins 2 & 3 closed
»
2E8h (COM4)
pins 2 & 3 closed
pins 1 & 2 closed
»
Disabled
pins 2 & 3 closed
pins 2 & 3 closed

SERIAL PORT 3 CONFIGURATION
Address
JP9
JP10
»
3E8h (COM3)
pins 1 & 2 closed
pins 1 & 2 closed
»
3F8h (COM1)
pins 2 & 3 closed
pins 1 & 2 closed
»
2F8h (COM2)
pins 2 & 3 closed
pins 2 & 3 closed
»
Disabled
pins 1 & 2 closed
pins 2 & 3 closed

SERIAL PORT 4 CONFIGURATION
Address
JP11
JP12
»
2E8h (COM4)
pins 1 & 2 closed
pins 1 & 2 closed
»
3F8h (COM1)
pins 2 & 3 closed
pins 2 & 3 closed
»
2F8h (COM2)
pins 2 & 3 closed
pins 1 & 2 closed
»
Disabled
pins 1 & 2 closed
pins 2 & 3 closed

PARALLEL PORT 1 ADDRESS SELECTION
Address
JP13
JP14
»
378h
pins 1 & 2 closed
pins 1 & 2 closed
»
278h
pins 1 & 2 closed
pins 2 & 3 closed
»
3BCh
pins 2 & 3 closed
pins 2 & 3 closed
»
Disabled
pins 2 & 3 closed
pins 1 & 2 closed

PARALLEL PORT 1 MODE SELECTION
Mode
JP15
JP16
»
ECP & EPP
pins 1 & 2 closed
pins 1 & 2 closed
»
ECP
pins 2 & 3 closed
pins 1 & 2 closed
»
EPP/bi-directional
pins 1 & 2 closed
pins 2 & 3 closed

Printer mode
pins 2 & 3 closed
pins 2 & 3 closed

PARALLEL PORT 2 ADDRESS SELECTION
Address
JP18
JP19
»
278h
pins 1 & 2 closed
pins 1 & 2 closed
»
378h
pins 1 & 2 closed
pins 2 & 3 closed
»
3BCh
pins 2 & 3 closed
pins 1 & 2 closed
»
Disabled
pins 2 & 3 closed
pins 2 & 3 closed

PARALLEL PORT 2 MODE SELECTION
Mode
JP20
JP21
»
ECP & EPP
pins 1 & 2 closed
pins 1 & 2 closed
»
ECP
pins 2 & 3 closed
pins 1 & 2 closed
»
EPP/bi-directional
pins 1 & 2 closed
pins 2 & 3 closed

Printer mode
pins 2 & 3 closed
pins 2 & 3 closed

PARALLEL PORT 1 ECP DMA SELECTION
DMA
JP24
JP25
»
DMA1
pins 1 & 2 closed
pins 1 & 2 closed
»
DMA0
pins 2 & 3 closed
pins 2 & 3 closed
»
Disabled
open
open

PARALLEL PORT 2 ECP DMA SELECTION
DMA
JP27
JP28
»
DMA3
pins 1 & 2 closed
pins 1 & 2 closed
»
DMA0
pins 2 & 3 closed
pins 2 & 3 closed
»
Disabled
open
open

SERIAL PORT 3 INTERRUPT SELECTION
IRQ
JP31/1
JP31/2
JP31/3
JP31/4
JP31/5
JP31/6
JP31/7
»
4
open
pins 1&2
open
open
open
open
open
»
3
pins 1&2
open
open
open
open
open
open
»
5
open
open
pins 1&2
open
open
open
open
»
9
open
open
open
pins 1&2
open
open
open
»
10
open
open
open
open
pins 1&2
open
open
»
11
open
open
open
open
open
pins 1&2
open
»
12
open
open
open
open
open
open
pins 1&2
Note: Designated pins are in the closed position.

SERIAL PORT 4 INTERRUPT SELECTION
IRQ
JP31/1
JP31/2
JP31/3
JP31/4
JP31/5
JP31/6
JP31/7
»
3
open
pins 2&3
open
open
open
open
open
»
4
pins 2&3
open
open
open
open
open
open
»
5
open
open
pins 2&3
open
open
open
open
»
9
open
open
open
pins 2&3
open
open
open
»
10
open
open
open
open
pins 2&3
open
open
»
11
open
open
open
open
open
pins 2&3
open
»
12
open
open
open
open
open
open
pins 2&3
Note: Designated pins are in the closed position.

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

SIDE - 2615 (REV. 1.1) Hard Disk/Floppy Controller Settings and Configuration

Search

My Books

Discover


Data bus:	16-bit, ISA
Size:	Three/quarter-length, full-height card
Hard drive supported:	Four IDE(AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, 1.44MB or 2.88MB drives

CONNECTIONS
Function	Location
34-pin floppy drive connector	J1
26-pin parallel port - internal	J2
40-pin primary IDE(AT) connector	J3
40-pin secondary IDE(AT) connector	J4
10-pin serial port 4 - internal	J5
10-pin serial port 3 - internal	J6
10-pin serial port 2 - internal	J7
10-pin serial port 1 - internal	J8
9-pin serial port 1 - external	J9
25-pin parallel port - external	J10
4-pin connector - drive active LED	JP1
Note: You can only use J8 or J9 at any time.

USER CONFIGURABLE SETTINGS
» Function		Location	Setting
»	IDE(AT) primary hard drive interface enabled	JP2/pins 1 & 2	closed
»	IDE(AT) primary hard drive interface disabled	JP2/pins 2 & 3	closed
»	IDE(AT) secondary hard drive interface enabled	JP3/pins 1 & 2	closed
»	IDE(AT) secondary hard drive interface disabled	JP3/pins 2 & 3	closed
»	Floppy drive interface enabled	JP4/pins 1 & 2	closed
»	Floppy drive interface disabled	JP4/pins 2 & 3	closed
»	Parallel port 1 IRQ 7 select	JP17/pins 1 & 2	closed
»	Parallel port 1 IRQ 5 select	JP17/pins 1 & 2	closed
»	Parallel port 2 IRQ 5 select	JP22/pins 1 & 2	closed
»	Parallel port 2 IRQ 7 select	JP22/pins 1 & 2	closed
»	IOCHRDY signal parallel port 1 EPP mode enabled	JP23/pins 1 & 2	closed
»	IOCHRDY signal parallel port 1 EPP mode disabled	JP23/pins 2 & 3	closed
»	IOCHRDY signal parallel port 2 EPP mode enabled	JP26/pins 1 & 2	closed
»	IOCHRDY signal parallel port 2 EPP mode disabled	JP26/pins 2 & 3	closed
»	Serial port 1 IRQ4 select	JP29/pins 1 & 2	closed
»	Serial port 1 IRQ3 select	JP29/pins 2 & 3	closed
»	Serial port 2 IRQ4 select	JP30/pins 1 & 2	closed
»	Serial port 2 IRQ3 select	JP30/pins 2 & 3	closed
»	Factory configured - do not alter	JP31/jumper 3	N/A
»	Secondary IDE IRQ15 select	JP33/pins 1 & 2	closed
»	Secondary IDE IRQ10 select	JP33/pins 1 & 2	closed

SERIAL PORT 1 CONFIGURATION
Address		JP5	JP6
»	3F8h (COM1)	pins 1 & 2 closed	pins 2 & 3 closed
»	2F8h (COM2)	pins 1 & 2 closed	pins 2 & 3 closed
»	3E8h (COM3)	pins 2 & 3 closed	pins 1 & 2 closed
»	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORT 2 CONFIGURATION
Address		JP7	JP8
»	2F8h (COM2)	pins 1 & 2 closed	pins 1 & 2 closed
»	3F8h (COM1)	pins 1 & 2 closed	pins 2 & 3 closed
»	2E8h (COM4)	pins 2 & 3 closed	pins 1 & 2 closed
»	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORT 3 CONFIGURATION
Address		JP9	JP10
»	3E8h (COM3)	pins 1 & 2 closed	pins 1 & 2 closed
»	3F8h (COM1)	pins 2 & 3 closed	pins 1 & 2 closed
»	2F8h (COM2)	pins 2 & 3 closed	pins 2 & 3 closed
»	Disabled	pins 1 & 2 closed	pins 2 & 3 closed

SERIAL PORT 4 CONFIGURATION
Address		JP11	JP12
»	2E8h (COM4)	pins 1 & 2 closed	pins 1 & 2 closed
»	3F8h (COM1)	pins 2 & 3 closed	pins 2 & 3 closed
»	2F8h (COM2)	pins 2 & 3 closed	pins 1 & 2 closed
»	Disabled	pins 1 & 2 closed	pins 2 & 3 closed

PARALLEL PORT 1 ADDRESS SELECTION
Address		JP13	JP14
»	378h	pins 1 & 2 closed	pins 1 & 2 closed
»	278h	pins 1 & 2 closed	pins 2 & 3 closed
»	3BCh	pins 2 & 3 closed	pins 2 & 3 closed
»	Disabled	pins 2 & 3 closed	pins 1 & 2 closed

PARALLEL PORT 1 MODE SELECTION
Mode		JP15	JP16
»	ECP & EPP	pins 1 & 2 closed	pins 1 & 2 closed
»	ECP	pins 2 & 3 closed	pins 1 & 2 closed
»	EPP/bi-directional	pins 1 & 2 closed	pins 2 & 3 closed
	Printer mode	pins 2 & 3 closed	pins 2 & 3 closed

PARALLEL PORT 2 ADDRESS SELECTION
Address		JP18	JP19
»	278h	pins 1 & 2 closed	pins 1 & 2 closed
»	378h	pins 1 & 2 closed	pins 2 & 3 closed
»	3BCh	pins 2 & 3 closed	pins 1 & 2 closed
»	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

PARALLEL PORT 2 MODE SELECTION
Mode		JP20	JP21
»	ECP & EPP	pins 1 & 2 closed	pins 1 & 2 closed
»	ECP	pins 2 & 3 closed	pins 1 & 2 closed
»	EPP/bi-directional	pins 1 & 2 closed	pins 2 & 3 closed
	Printer mode	pins 2 & 3 closed	pins 2 & 3 closed

PARALLEL PORT 1 ECP DMA SELECTION
DMA		JP24	JP25
»	DMA1	pins 1 & 2 closed	pins 1 & 2 closed
»	DMA0	pins 2 & 3 closed	pins 2 & 3 closed
»	Disabled	open	open

PARALLEL PORT 2 ECP DMA SELECTION
DMA		JP27	JP28
»	DMA3	pins 1 & 2 closed	pins 1 & 2 closed
»	DMA0	pins 2 & 3 closed	pins 2 & 3 closed
»	Disabled	open	open

SERIAL PORT 3 INTERRUPT SELECTION
IRQ		JP31/1	JP31/2	JP31/3	JP31/4	JP31/5	JP31/6	JP31/7
»	4	open	pins 1&2	open	open	open	open	open
»	3	pins 1&2	open	open	open	open	open	open
»	5	open	open	pins 1&2	open	open	open	open
»	9	open	open	open	pins 1&2	open	open	open
»	10	open	open	open	open	pins 1&2	open	open
»	11	open	open	open	open	open	pins 1&2	open
»	12	open	open	open	open	open	open	pins 1&2
Note: Designated pins are in the closed position.

SERIAL PORT 4 INTERRUPT SELECTION
IRQ		JP31/1	JP31/2	JP31/3	JP31/4	JP31/5	JP31/6	JP31/7
»	3	open	pins 2&3	open	open	open	open	open
»	4	pins 2&3	open	open	open	open	open	open
»	5	open	open	pins 2&3	open	open	open	open
»	9	open	open	open	pins 2&3	open	open	open
»	10	open	open	open	open	pins 2&3	open	open
»	11	open	open	open	open	open	pins 2&3	open
»	12	open	open	open	open	open	open	pins 2&3
Note: Designated pins are in the closed position.