QD6500, QD6500A VL Hard Disk/Floppy Controller Settings and Configuration

Data bus:	32-bit, VL-bus
Size:	Three/quarter-length, half-height card
Hard drive supported:	Two IDE (AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE (AT) interface connector	CN1
34-pin control cabled connector - floppy drive	CN2
Game port	CN3
9-pin serial port 1 - external	CN4
10-pin serial port 2 - internal	CN5
25-pin parallel port	CN6
2-pin connector - drive active LED	JP5

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Factory configured - do not alter	JP1	open
»	Factory configured - do not alter	JP2	pins 2 & 3 closed
»	Chipset register address = 0BXh	JP3	pins 2 & 3 closed
	Chipset register address = 03Xh	JP3	pins 1 & 2 closed
»	IDE port address = 1F0h	JP4	pins 2 & 3 closed
	IDE port address = 170h	JP4	pins 1 & 2 closed
»	Floppy drive enabled	JP8	pins 1 & 2 closed
	Floppy drive disabled	JP8	pins 2 & 3 closed
»	Game port enabled	JP13	pins 1 & 2 closed
	Game port disabled	JP13	pins 2 & 3 closed

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	IDE IRQ = IRQ14	JP15	pins 1 & 2 closed
	IDE IRQ = IRQ15	JP15	pins 2 & 3 closed
	Address lines 3F7/177h enabled (74LS244 chip installed)	JP16	closed
	Address lines 3F7/177h disabled	JP16	open

SERIAL PORT 1 CONFIGURATION
COM		JP6	JP7
»	COM1	pins 1 & 2 closed	pins 1 & 2 closed
	COM3	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORT 2 CONFIGURATION
COM		JP11	JP12
»	COM2	pins 1 & 2 closed	pins 1 & 2 closed
	COM4	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

PARALLEL PORT CONFIGURATION
LPT/Address		JP9	JP10
»	LPT1/378h	pins 1 & 2 closed	pins 1 & 2 closed
	LPT2/278h	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

BIOS ADDRESS - JP14
Address		Jumper A	Jumper B	Jumper C	Jumper D
»	Disabled	closed	open	open	open
	C800h	open	closed	open	open
	D000h	open	open	closed	open
	D800h	open	open	open	closed