FAST!SCSI ISA Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Up to seven SCSI devices
Floppy drives supported:	N/A

CONNECTIONS
Function	Location
50-pin SCSI connector - external	CN1
50-pin SCSI connector - internal	CN2
4-pin connector - Drive active LED	CN3

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	I/O Address - 330h	JP3	pins 1 & 2 closed
	I/O Address - 230h	JP3	pins 2 & 3 closed
»	SCSI termination - enabled	JP8	open
	SCSI termination - disabled	JP8	closed
»	Data transfer mode asynchronous	JP4/A	open
	Data transfer mode synchronous	JP4/A	closed
»	SCSI ID7	JP4/B	open
	SCSI ID6	JP4/B	closed
»	Parity - enabled	JP4/C	open
	Parity - disabled	JP4/C	closed

BIOS SELECT
Setting		JP6/A	JP6/B
»	Enabled	closed	open
	Disabled	open	open

BIOS ADDRESS SELECT
Address		JP2/A	JP2/B
»	C8000	open	open
	CC000	open	closed
	D8000	closed	open
	DC000	closed	closed

INTERRUPT SELECT
IRQ		JP5/A	JP5/B	JP5/C	JP5/D	JP4/D	JP4/E
»	IRQ11	open	closed	open	open	open	open
	IRQ10	closed	open	open	open	closed	open
	IRQ12	open	open	closed	open	closed	closed
	IRQ15	open	open	open	closed	open	closed