PT-603 Hard Disk/Floppy Controller Settings and Configuration
PINE TECHNOLOGY
PT-603
Data bus: | 16-bit, ISA |
Size: | Half-length, half-height card |
Hard drive supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE(AT) Interface connector | JP1 |
4-pin connector - Drive active LED | JP2 |
34-pin control cable connector - floppy drive | JP3 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Floppy drive enabled | JP4 | closed |
Floppy drive disabled | JP4 | open | |
My Books
