PEL-PCI-ULTRA2 Hard Disk/Floppy Controller Settings and Configuration
PE LOGIC
PEL-PCI-ULTRA2
Card Type | Controller card |
Maximum Onboard Memory | Unidentified |
Hard Drives supported | Up to 15 SCSI devices |
Floppy drives supported | None |
I/O Options | SCSI connectors (2), LED connector |
Data Bus | 16-bit ISA |
Card Size | Half-length, full height card |
CONNECTIONS | |||
Function | Location | Function | Location |
68-pin SCSI connector - external | CN1 | 4-pin connector - drive active LED | CN3 |
68-pin SCSI connector - internal | CN2 | ||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
PWR | Green | On | Power is on |
PWR | Green | Off | Power is off |
TERM | Green | On | Termination in use |
TERM | Green | Off | Termination not in use |
LVD | Green | On | ULTRA2 device interface active |
LVD | Green | Off | ULTRA2 device interface inactive |
SCSI | Red | On | SCSI is busy |
SCSI | Red | Off | SCSI is idle |
My Books
