SUPER I/O Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit, ISA
Size:	Half-length, half-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	360KB, 720KB, 1.2MB, 1.44MB

CONNECTIONS
Function	Location
40-pin AT Interface (IDE) connector	CN1
34-pin control cable connector - floppy drive	CN2
Game port	CN3
10-pin serial port 1 (COM1/COM3)	CN4
10-pin serial port 2 (COM2/COM4)	CN5
25-pin parallel port	CN6
HDD LED connector	J2

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	IDE I/O channel ready enabled	J1	pins 1 & 2 closed
	IDE I/O channel ready disabled	J1	Open
»	Game port (CN3) enabled	JP3	pins 1 & 2 closed
	Game port (CN3) disabled	JP3	pins 2 & 3 closed
»	Floppy drive (CN2) enabled	JP7	pins 1 & 2 closed
	Floppy drive (CN2) disabled	JP7	pins 2 & 3 closed
»	HDC exists	JP8	pins 1 & 2 closed
	HDC does not exist	JP8	pins 2 & 3 closed

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	IDE (CN1) enabled	JP9	pins 1 & 2 closed
	IDE (CN1) disabled	JP9	pins 2 & 3 closed

SERIAL PORT 1 (CN4) CONFIGURATION
Function		JP4	JP6
»	COM1	pins 1 & 2 closed	pins 1 & 2 closed
	COM3	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	N/A	pins 2 & 3 closed

SERIAL PORT 2 (CN5) CONFIGURATION
Function		JP1	JP2
»	COM2	pins 1 & 2 closed	pins 1 & 2 closed
	COM4	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	N/A	pins 2 & 3 closed

PARALLEL PORT (CN6) CONFIGURATION
Function		JP5	JP10
»	LPT2	pins 1 & 2 closed	pins 1 & 2 closed
	LPT3	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	N/A	pins 2 & 3 closed