BT950 Hard Disk/Floppy Controller Settings and Configuration
MYLEX CORPORATION
BT950
Card Type | Hard drive controller card |
Hard Drives supported | Up to 15 SCSI devices |
Floppy drives supported | None |
Data Bus | 32-bit PCI |
Card Size | Half-length, half-height card |
CONNECTIONS | |||
Function | Location | Function | Location |
68-pin SCSI connector - external | CN1 | 50-pin SCSI connector - internal | CN3 |
68-pin SCSI connector - internal | CN2 | 4-pin connector - drive active LED | CN4 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | High termination enabled |
LED1 | Green | Off | High termination disabled |
LED2 | Green | On | Low termination enabled |
LED2 | Green | Off | Low termination disabled |
LED3 | Unidentified | Blinking | SCSI activity |
LED3 | Unidentified | Off | SCSI idle |
My Books
