LCS-6220 Hard Disk/Floppy Controller Settings and Configuration
LONGSHINE MICROSYSTEM, INC.
LCS-6220
Data bus: 8-bit, ISA
Size: Full-length, half-height card
Hard drives supported: Two MFM ST506/ST412 drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
CONNECTIONS | |
Function | Location |
34-pin control cable connector-hard drive | J1 |
20-pin data cable connector-drive 0 | J2 |
20-pin data cable connector-drive 1 | J3 |
34-pin data cable connector-floppy drive | J4 |
5-pin connector-DC power | J5 |
4-pin connector-drive active LED | LED1 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Supports hard drives with 8 or less head | JP1 | pins 1 & 2 closed |
Supports hard drives with 9-16 heads | JP1 | pins 2 & 3 closed | |
| » | BIOS address is E8000h | JP2 | closed |
BIOS address is E8001h | JP2 | open | |
| » | Floppy drive port address is 3F0-3F7h | JP7 | pins 2 & 3 closed |
Floppy drive port address is 370-377h | JP7 | pins 1 & 2 closed | |
FLOPPY DRIVE CONFIGURATION | ||||
DRIVE A | DRIVE B | |||
FLOPPY DRIVE TYPE | JP3 | JP4 | JP5 | JP6 |
360KB | closed | closed | closed | closed |
1.2MB | closed | either | closed | closed |
720KB | open | closed | open | closed |
1.44MB | open | open | open | open |
BIOS ADDRESS | ||||
Select | JP8 | JP9 | JP10 | |
CA000h | closed | open | open | |
| » | CC000h | open | closed | open |
CE000h | open | open | closed | |
My Books
