COMPLETE-550 Hard Disk/Floppy Controller Settings and Configuration
LAVA COMPUTER MFG, INC.
COMPLETE-550
Data Bus: | 16-bit ISA |
Size: | Half-length, Full-height card |
Hard drives supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
DB-25 female connector-parallel port 1 | CN1 |
DB-9 male connector-serial port 1 | CN2 |
10-pin connector-serial port 2 internal | CN3 |
26-pin connector-parallel port 2 internal | CN4 |
34-pin data cable connector-floppy drive internal | CN5 |
40-pin connector IDE (AT) Interface internal | CN6 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Parallel port 1 enabled. | JP11 | Pins 2 & 3 closed |
Parallel port 1 disabled. | JP11 | Pins 1 & 2 closed | |
| » | Floppy drive enabled. | JP12 | Pins 2 & 3 closed |
Floppy drive disabled. | JP12 | Pins 1 & 2 closed | |
| » | Hard drive enabled. | JP13 | Pins 2 & 3 closed |
Hard drive disabled. | JP13 | Pins 1 & 2 closed | |
PRIMARY PARALLEL PORT ADDRESS SELECT | |
Function | JP10 |
LPT1 | Pins 2 & 3 closed |
LPT2 | Pins 1 & 2 closed |
ALTERNATE PARALLEL PORT ADDRESS SELECT | |
Function | JP9 |
LPT1 | Pins 2 & 3 closed |
LPT2 | Pins 1 & 2 closed |
SERIAL PORT 2 CONFIGURATION | |||
COM | JP8/A | JP8/B | |
| » | COM1 | Pins 1 & 2 closed | All open |
COM2 | Pins 2 & 3 closed | All open | |
COM3 | All open | Pins 1 & 2 closed | |
COM4 | All open | Pins 2 & 3 closed | |
SERIAL PORT 1 CONFIGURATION | |||
COM | JP7/A | JP7/B | |
| » | COM2 | Pins 2 & 3 closed | All open |
COM1 | Pins 1 & 2 closed | All open | |
COM3 | All open | Pins 1 & 2 closed | |
COM4 | All open | Pins 2 & 3 closed | |
PRIMARY SERIAL PORT INTERUPT SELECT | ||||||||
IRQ | JP5/A | JP5/B | JP5/C | JP5/D | JP5/E | JP5/F | JP4 | JP3 |
IRQ2 | All open | All open | All open | All open | All open | 2 & 3 | All open | All open |
IRQ3 | All open | All open | All open | All open | All open | All open | All open | 2 & 3 |
IRQ4 | All open | All open | All open | All open | All open | All open | 2 & 3 | All open |
IRQ5 | All open | All open | All open | All open | 2 & 3 | All open | All open | All open |
IRQ10 | All open | All open | All open | 2 & 3 | All open | All open | All open | All open |
IRQ11 | All open | All open | 2 & 3 | All open | All open | All open | All open | All open |
IRQ12 | All open | 2 & 3 | All open | All open | All open | All open | All open | All open |
IRQ13 | 2 & 3 | All open | All open | All open | All open | All open | All open | All open |
Note: Pins designated are in the closed position. | ||||||||
ALTERNATE SERIAL PORT INTERUPT SELECT | ||||||||
IRQ | JP5/A | JP5/B | JP5/C | JP5/D | JP5/E | JP5/F | JP4 | JP3 |
IRQ2 | All open | All open | All open | All open | All open | 1 & 2 | All open | All open |
IRQ3 | All open | All open | All open | All open | All open | All open | All open | 1 & 2 |
IRQ4 | All open | All open | All open | All open | All open | All open | 1 & 2 | All open |
IRQ5 | All open | All open | All open | All open | 1 & 2 | All open | All open | All open |
IRQ10 | All open | All open | All open | 1 & 2 | All open | All open | All open | All open |
IRQ11 | All open | All open | 1 & 2 | All open | All open | All open | All open | All open |
IRQ12 | All open | 1 & 2 | All open | All open | All open | All open | All open | All open |
IRQ13 | 1 & 2 | All open | All open | All open | All open | All open | All open | All open |
Note: Pins designated are in the closed position. | ||||||||
PRIMARY PARALLEL PORT IRQ SELECT | |
IRQ | JP1 |
IRQ7 | Pins 2 & 3 closed |
IRQ5 | Pins 1 & 2 closed |
ALTERNATE PARALLEL PORT IRQ SELECT | |
IRQ | JP2 |
IRQ7 | Pins 2 & 3 closed |
IRQ5 | Pins 1 & 2 closed |
ALTERNATE PARALLEL PORT DIRECTION SETTING | ||
Function | JP6 | |
| » | Unidirectional | Pins 2 & 3 closed |
Bi-directional | Pins 1 & 2 closed | |
Note: The primary parallel port is always Uni-directional. | ||
My Books
