KW-559AH Hard Disk/Floppy Controller Settings and Configuration

KOUWELL ELECTRONICS CORPORATION

Data bus:	32-bit VL-bus
Size:	Three-quarter length, half-height card
Hard drive supported:	Two IDE(AT) drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE(AT) connector	CN1
34-pin cable connector - floppy drive	CN2
16-pin game port	CN3
10-pin serial port 2 - internal	CN4
10-pin serial port 1 - internal	CN5
25-pin parallel port - external	CN6
4-pin connector - drive active LED	JP1

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Parallel port IRQ 7 select	JP3/G	Pins 2 & 3 closed
	Parallel port IRQ 5 select	JP3/G	Pins 1 & 2 closed
»	Floppy drive interface enabled	JP3/H	Pins 1 & 2 closed
	Floppy drive interface disabled	JP3/H	Pins 2 & 3 closed
»	Parallel port is bi-directional	JP4	Open
	Parallel port is uni-directional	JP4	Closed

PARALLEL PORT ADDRESS SELECTION
LPT		JP3/E	JP3/F
»	LPT1 (378h)	Pins 1 & 2 closed	Pins 2 & 3 closed
	LPT2 (278h)	Pins 2 & 3 closed	Pins 1 & 2 closed
	LPT3 (3BCh)	Pins 1 & 2 closed	Pins 1 & 2 closed
	Disabled	Pins 2 & 3 closed	Pins 2 & 3 closed

SERIAL PORT 1 ADDRESS SELECTION
COM		JP3/A	JP3/B
»	COM1 (3F8h)	Pins 1 & 2 closed	Pins 2 & 3 closed
	COM3 (3E8h)	Pins 2 & 3 closed	Pins 1 & 2 closed
	COM4 (2E8h)	Pins 1 & 2 closed	Pins 1 & 2 closed
	Disabled	Pins 2 & 3 closed	Pins 2 & 3 closed

SERIAL PORT 2 ADDRESS SELECTION
COM		JP3/C	JP3/D
»	COM2 (2F8h)	Pins 1 & 2 closed	Pins 2 & 3 closed
	COM3 (3E8h)	Pins 1 & 2 closed	Pins 1 & 2 closed
	COM4 (2E8h)	Pins 2 & 3 closed	Pins 1 & 2 closed
	Disabled	Pins 2 & 3 closed	Pins 2 & 3 closed

SERIAL PORT 1 INTERRUPT SELECTION
IRQ		JP7/A	JP7/B	JP7/C	JP7/D	JP7/E
	IRQ3	2 & 3	Open	Open	Open	Open
»	IRQ4	Open	2 & 3	Open	Open	Open
	IRQ5	Open	Open	2 & 3	Open	Open
	IRQ9	Open	Open	Open	2 & 3	Open
	IRQ12	Open	Open	Open	Open	2 & 3
Note: Pins designated must be in the closed position.

SERIAL PORT 2 INTERRUPT SELECTION
IRQ		JP7/A	JP7/B	JP7/C	JP7/D	JP7/E
»	IRQ3	1 & 2	Open	Open	Open	Open
	IRQ4	Open	1 & 2	Open	Open	Open
	IRQ5	Open	Open	1 & 2	Open	Open
	IRQ9	Open	Open	Open	1 & 2	Open
	IRQ12	Open	Open	Open	Open	1 & 2
Note: Pins designated must be in the closed position.

IDE DRIVE SPEED SELECTION
Setting		JP2/A	JP2/B
	Speed 0 / Slow	Pins 1 & 2 closed	Pins 1 & 2 closed
»	Speed 2	Pins 2 & 3 closed	Pins 1 & 2 closed
	Speed 4	Pins 1 & 2 closed	Pins 2 & 3 closed
	Speed 6 / Fast	Pins 2 & 3 closed	Pins 2 & 3 closed

GAME PORT SELECTION
Setting		JP5	JP6
»	Enabled	Closed	Closed
	Disabled	Open	Open