IDE4 - AT BUS/FLOPPY DISK CONTROLLER Hard Disk/Floppy Controller Settings and Configuration
KIMPSION INTERNATIONAL
IDE4 - AT BUS/FLOPPY DISK CONTROLLER
Data bus: | 16-bit, ISA |
Size: | Half-length, full-height card |
Hard drive supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE(AT) Interface connector | CN1 |
34-pin control cable connector - floppy drive | CN2 |
4-pin connector - Drive active LED | JP4 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Floppy drive enabled | JP2 | open |
Floppy drive disabled | JP2 | closed | |
| » | Hard drive enabled | JP3 | open |
Hard drive disabled | JP3 | closed | |
My Books
