CA8370 Hard Disk/Floppy Controller Settings and Configuration
JPN CORPORATION
CA8370
Data Bus | 16-bit ISA |
Card Size | Half height, half length |
Hard Drives Supported | Two IDE(AT) devices |
Floppy Drives Supported | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |||
Function | Label | Function | Label |
34-pin cable connector - floppy drive | JP1 | 2-pin drive active LED | JP3 |
40-pin IDE(AT) connector | JP2 | ||
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Floppy drive interface enabled | JP4 | Closed |
| Floppy drive interface disabled | JP4 | Open | |
| » | IDE(AT) interface enabled | JP5 | Closed |
| IDE(AT) interface disabled | JP5 | Open | |
My Books
