INTELLIGENT COMPUTER PERIPHERALS
GDT6120, GDT6520
Maximum Onboard Memory | 32MB |
Data Bus | 32-bit PCI |
Card Size | Full-height, three-quarter-length card |
Hard Drives Supported | Up to 14 SCSI devices |
Floppy Drives Supported | None |
RAID Levels Supported | RAID 0, 1, levels 4 and 5 on GDT6520 only |
CONNECTIONS | |||
Function | Label | Function | Label |
50-pin SCSI connector - external, channel A | J1 | 50-pin SCSI connector - internal, channel B | J4 |
50-pin SCSI connector - internal, channel A | J2 | RAID GAL | U1 |
Drive active LEDs - see pinout below | J3 |
J3 PINOUT | |||
Function | Pin | Function | Pin |
Channel A common | 1 | Channel B common | 3 |
Channel A active | 2 | Channel B active | 4 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | Active termination power enabled for channel A | TA | Closed |
Active termination power disabled for channel A | TA | Open | |
» | Active termination power enabled for channel B | TB | Closed |
Active termination power disabled for channel B | TB | Open |
DRAM CONFIGURATION | |
Size | Bank 0 |
4MB | (1) 1M x 32 |
8MB | (1) 2M x 32 |
16MB | (1) 4M x 32 |
32MB | (1) 8M x 32 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
A | Yellow | On | SCSI channel A is active |
A | Yellow | Off | SCSI channel A is not active |
B | Yellow | On | SCSI channel B is active |
B | Yellow | Off | SCSI channel B is not active |
T | Green | On | Direct memory access is in progress |
T | Green | Off | Direct memory access is not in progress |
S | Green | On | Card is operating normally |
S | Green | Off | An error has occurred |