INI-9400U (VER. 2) Hard Disk/Floppy Controller Settings and Configuration
INITIO CORPORATION
INI-9400U (VER. 2)
Card Type | Hard drive controller card |
Hard Drives supported | Up to 7 SCSI devices |
Floppy drives supported | None |
Data Bus | 32-bit PCI |
Card Size | Full length, full-height card |
CONNECTIONS | |||
Function | Location | Function | Location |
50-pin UltraSCSI connector - external | CN1 | Channel A LED connector | CN6 |
50-pin UltraSCSI connector - internal | CN2 | Channel B LED connector | CN7 |
50-pin UltraSCSI connector - internal | CN3 | Channel C LED connector | CN8 |
50-pin UltraSCSI connector - internal | CN4 | Channel D LED connector | CN9 |
50-pin UltraSCSI connector - internal | CN5 | Global LED connector | CN10 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | Auto termination for multiple initiators enabled | JP1 | Closed |
Auto termination for multiple initiators disabled | JP1 | Open | |
| » | Auto termination for multiple initiators enabled | JP2 | Closed |
Auto termination for multiple initiators disabled | JP2 | Open | |
| » | Auto termination for multiple initiators enabled | JP3 | Closed |
Auto termination for multiple initiators disabled | JP3 | Open | |
| » | Auto termination for multiple initiators enabled | JP4 | Closed |
Auto termination for multiple initiators disabled | JP4 | Open | |
My Books
