INI-6102 Hard Disk/Floppy Controller Settings and Configuration

Data Bus	16-bit ISA
Card Size	Half-length, full-height card
Hard Drives supported	Up to 7 SCSI devices
Floppy drives supported	None

CONNECTIONS
Function	Location	Function	Location
50-pin SCSI connector - internal	J1	34-pin cable connector - floppy drive	J3
50-pin SCSI connector - external	J2	4-pin connector - drive active LED	JP1

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Floppy drive interface enabled	SW1/8	On
	Floppy drive interface disabled	SW1/8	Off
»	PnP configuration (Plug and Play) enabled	SW1/7	Off
	PnP configuration disabled	SW1/7	On

BIOS ADDRESS SELECTION (PNP DISABLED)
Address		SW1/4	SW1/5	SW1/6	SW1/7
»	C8000h	Off	Off	Off	Off
	CC000h	On	Off	Off	Off
	D0000h	Off	On	Off	Off
	D4000h	On	On	Off	Off
	D8000h	Off	Off	On	Off
	DC000h	On	Off	On	Off
	Non-bootable	Off	On	On	Off
	Test mode	On	On	On	Off

BIOS ADDRESS SELECTION (PNP ENABLED)
Address		SW1/4	SW1/5	SW1/6	SW1/7
»	C8000h	Off	Off	Off	On
	CC000h	On	Off	Off	On
	D0000h	Off	On	Off	On
	D4000h	On	On	Off	On
	D8000h	Off	Off	On	On
	DC000h	On	Off	On	On
	BIOS disable	Off	On	On	On
	Test mode	On	On	On	On

ISA I/O ADDRESS SELECTION
Setting		SW1/1	SW1/2	SW1/3
	130-13Fh	Off	On	Off
	140-14Fh	On	On	Off
	230-23Fh	Off	Off	On
	240-24Fh	On	Off	On
»	330-33Fh	Off	Off	Off
	340-34Fh	On	Off	Off
	Test mode	On	On	On
Note: Address 330-33Fh is the default when PNP is disabled.