INI-9520U, INI-9520UW Hard Disk/Floppy Controller Settings and Configuration
INITIO CORPORATION
INI-9520U, INI-9520UW
Card Type | Hard drive controller card, Network Interface Card |
Hard Drives supported | Up to 30 SCSI devices |
Floppy drives supported | None |
NIC Type | Ethernet |
Network Transfer Rate | 100Mbps/10Mbps |
Topology | Star |
Wiring Type | RJ-45 Unshielded twisted pair |
Data Bus | 32-bit PCI |
Card Size | Full-length, full-height card |
CONNECTIONS | |||
Function | Location | Function | Location |
RJ-45 connector | CN1 | 68-pin UltraWide SCSI connector channel B - internal | CN4 |
50-pin UltraSCSI connector channel A - external | CN2 | 50-pin UltraSCSI connector channel A - internal | CN5 |
68-pin UltraWide SCSI connector channel A - internal | CN3 | 50-pin UltraSCSI connector channel B - internal | CN6 |
DIAGNOSTIC LEDS | ||
LED | Status | Condition |
LED1 | On | Operation at 100 Mbps. |
LED1 | Off | Not operating at 100 Mbps |
LED2 | On | Connection is good |
LED2 | Off | Connection is broken |
LED3 | On or Blinking | Data is being received/transmitted |
LED3 | Off | Data is not being received/transmitted |
LED4 | On | Operating at 10 Mbps. |
LED4 | Off | Not operating at 10 Mbps |
My Books
