IFT-3101U Hard Disk/Floppy Controller Settings and Configuration

Card Type	Hard drive controller card
Maximum Onboard Memory	64MB DRAM
Hard Drives supported	Up to 14 SCSI devices
Floppy drives supported	None
Data Bus	SCSI
Form Factor	3.5"

CONNECTIONS
Function	Location	Function	Location
SCSI channel 0 connector (connect to host SCSI adapter)	CN1	Fail over port	CN4
SCSI channel 1 connector	CN2	Fail over port	CN5
SCSI channel 2 connector	CN3

SWITCH FUNCTIONS
Function	Switch
Scroll through available functions	SW1
Scroll through available functions	SW2
Chooses or executes an option	SW3
Returns to preceding menu or cancel selection	SW4

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Unidentified	On	Power on
LED1	Unidentified	Off	Power off
LED2	Unidentified	Blinking	Data is being accessed
LED2	Unidentified	Off	No drive activity
LED2	Unidentified	On	Unprocessed cached data still in memory
LED3	Unidentified	On	Lights when service is required
LED3	Unidentified	Off	Service not required

CONNECTIONS
Function	Location	Function	Location
Daughter/main board connector	CN6	Daughter/main board connector	CN7

DRAM CONFIGURATION
Size	BANK 0
4MB	(1) 1MB X 36
8MB	(1) 2MB X 36
16MB	(1) 4MB X 36
32MB	(1) 8MB X 36
64MB	(1) 16MB X 36

CONNECTIONS
Function	Location	Function	Location
SCSI channel 0 connector (connect to host SCSI adapter)	CN1	Fail over port	CN5
SCSI channel 1 connector	CN2	Daughter/main board connector	CN6
SCSI channel 2 connector	CN3	Daughter/main board connector	CN7
Fail over port	CN4

MISCELLANEOUS TECHNICAL NOTES

Note: For more information on front panel LCD display features, please see manufactures documentation.