ID-220 Hard Disk/Floppy Controller Settings and Configuration
IDENTITY SYSTEMS TECHNOLOGY, INC.
ID-220
Data bus: | 16-bit, ISA |
Size: | Half-length, half-height card |
Hard drive supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE (AT) Interface connector | J1 |
2-pin connector-drive active LED | J2 |
34-pin control cable-connector - floppy drive | J5 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Hard drive enabled | J3 | closed |
Hard drive disabled | J3 | open | |
| » | Floppy drive enabled | J4 | closed |
Floppy drive disabled | J4 | open | |
My Books
