lotus

previous page: GA-403F Hard Disk/Floppy Controller Settings and Configuration
  
page up: Hard Disk/Floppy Controller Specs: E-H
  
next page: IODE-3290U Hard Disk/Floppy Controller Settings and Configuration

GA-410 Hard Disk/Floppy Controller Settings and Configuration






GIGA-BYTE TECHNOLOGY, INC.

GA-410

Data bus:

PCI-bus

Size:

Half-length, three quarter-height card

Hard drive supported:

Up to seven SCSI devices

Floppy drives supported:

Two 360KB, 720KB, 1.2MB or 1.44MB drives

CONNECTIONS

Function

Location

50-pin SCSI connector - external

J1

50-pin SCSI connector - internal

J2

Drive active LED connector

JP4

USER CONFIGURABLE SETTINGS

Function

Location

Setting

Factory configured - do not alter

JP2

N/A

 

GA-410 is the primary SCSI card in the system

JP3

pins 1 & 2 closed

 

GA-410 is other than the primary SCSI card in the system

JP3

pins 2 & 3 closed

INTERRUPT SELECT - JP1

IRQ

Jumper A

Jumper B

Jumper C

Jumper D

Interrupt A

closed

open

open

open

Interrupt B

open

closed

open

open

Interrupt C

open

open

closed

open

Interrupt D

open

open

open

closed

Note:If the GA-410 is the primary SCSI card in the system, IRQ9 must be reserved on the main board.








TOP
previous page: GA-403F Hard Disk/Floppy Controller Settings and Configuration
  
page up: Hard Disk/Floppy Controller Specs: E-H
  
next page: IODE-3290U Hard Disk/Floppy Controller Settings and Configuration