EV-332 Hard Disk/Floppy Controller Settings and Configuration
EVEREX SYSTEMS, INC.
EV-332
Data bus: 16 bit, ISA
Size: Full-length, full-height card
Hard drives supported: Two MFM ST506 drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
Maximum heads/cyl.: 8 heads and 1024 cylinders
CONNECTIONS | |
Function | Location |
34-pin control cable connector-hard drive | J1 |
20-pin data cable connector-drive 0 | J2 |
20-pin data cable connector-drive 1 | J3 |
34-pin data cable connector-floppy drive | J4 |
37-pin external control cable connector-hard drive | J5 |
4-pin connector-drive active LED | J6 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Factory configured - do not alter | W1 & W2 | closed |
| » | Factory configured - do not alter | W4 | open |
| » | Floppy drive port address is 3F2,3F4-3F7h | W5 | open |
Floppy drive port address is 372,374-377h | W5 | closed | |
| » | Hard drive port address is 1F0-1F7h | W6 | open |
Hard drive port address is 170-177h | W6 | closed | |
| » | Factory configured - do not alter | W7 | open |
My Books
