EVEREX SYSTEMS, INC.
EV-368
Data Bus: | 16-bit ISA |
Size: | Half-length, Full-height card |
Hard drives supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE (AT) Interface connector | CN1 |
2-pin connector - Drive active LED | J2 |
34-pin control cable connector - floppy drive | CN2 |
15-pin game port - internal | CN3 |
10-pin serial port (COM1/3) - internal | CN4 |
10-pin serial port (COM2/4) - internal | CN5 |
25-pin parallel port (LPT2/3) external | CN6 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
» | I/O Channel Ready signal enabled | J1 | Closed |
I/O Channel Ready signal disabled | J1 | Open | |
» | Serial port 2 (CN5) is set to COM2 | JP1 | Pins 1 & 2 closed |
Serial port 2 (CN5) is set to COM4 | JP1 | Pins 2 & 3 closed | |
» | Serial port 2 (CN5) enabled | JP2 | Pins 1 & 2 closed |
Serial port 2 (CN5) disabled | JP2 | Pins 2 & 3 closed | |
» | Game port (CN3) enabled | JP3 | Pins 1 & 2 closed |
Game port (CN3) disabled | JP3 | Pins 2 & 3 closed | |
» | Serial port 1 (CN4) is set to COM1 | JP4 | Pins 1 & 2 closed |
Serial port 1 (CN4) is set to COM4 | JP4 | Pins 2 & 3 closed | |
» | Printer port is set to LPT2 | JP5 | Pins 1 & 2 closed |
Printer port is set to LPT3 | JP5 | Pins 2 & 3 closed | |
» | Serial port 1 (CN4) enabled | JP6 | Pins 1 & 2 closed |
Serial port 1 (CN4) disabled | JP6 | Pins 2 & 3 closed | |
» | Floppy drive enabled | JP7 | Pins 1 & 2 closed |
Floppy drive disabled | JP7 | Pins 2 & 3 closed | |
» | Hard drive controllers exist | JP8 | Pins 1 & 2 closed |
Hard drive controllers do not exist | JP8 | Pins 2 & 3 closed | |
» | Hard drive enabled | JP9 | Pins 1 & 2 closed |
Hard drive disabled | JP9 | Pins 2 & 3 closed | |
» | Printer port enabled | JP10 | Pins 1 & 2 closed |
Printer port disabled | JP10 | Pins 2 & 3 closed |