IDE-PCI (TTL VERSION) Hard Disk/Floppy Controller Settings and Configuration

Data bus:	32-bit PCI
Size:	Half-length, full-height card
Hard drive supported:	Four IDE(XT) drives
Floppy drives supported:	None

CONNECTIONS
Function	Location
40-pin primary IDE(AT) connector	CN1
40-pin secondary IDE(AT) connector	CN2
4-pin connector - drive active LED	JP2

USER CONFIGURABLE SETTINGS
Function		Location	Setting
	CPU clock speed <=33MHz	JP3/ 3	open
	CPU clock speed >33MHz	JP3/ 3	closed
»	IDE(AT) interface enabled	JP4	open
	IDE(AT) interface disabled	JP4	closed

PCI INTERRUPT SELECTION FOR PRIMARY IDE, IRQ 14
INT	JP1/ 1	JP1/ 2	JP1/ 3	JP1/ 4
A	closed	open	open	open
B	open	closed	open	open
C	open	open	closed	open
D	open	open	open	closed

PCI INTERRUPT SELECTION FOR SECONDARY IDE, IRQ 15
INT	JP5/ 1	JP5/ 2	JP5/ 3	JP5/ 4
A	closed	open	open	open
B	open	closed	open	open
C	open	open	closed	open
D	open	open	open	closed

TIMING MODE SELECTION
Mode	JP3/ 1	JP3/ 2
0 (600ns. normal speed device)	open	open
1 (383ns. fast speed device)	closed	open
2 (240ns. turbo speed device)	open	closed