BT-410A Hard Disk/Floppy Controller Settings and Configuration
BUSLOGIC INC.
BT-410A
Data bus: | 32-bit, VL-bus |
Size: | Full-length, full-height card |
Hard drive supported: | Up to four IDE(AT) interface devices |
Floppy drives supported: | 360KB, 720KB, 1.2MB or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin connector - IDE (AT) interface 1 | CN1 |
40-pin connector - IDE (AT) interface 2 | CN2 |
34-pin connector - Floppy drive interface | CN3 |
4-pin connector - Drive active LED | JP1 |
4-pin connector - Speaker | JP2 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
» | Hard drive filtering for primary I/O address disabled | JDR0 | open |
| Hard drive filtering for primary I/O address enabled | JDR0 | closed |
» | Hard drive filtering for secondary I/O address disabled | JDR1 | open |
| Hard drive filtering for secondary I/O address enabled | JDR1 | closed |
DRAM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
512KB | (2) 256K x 9 | NONE |
1MB | (2) 256K x 9 | (2) 256K x 9 |
2MB | (2) 1M x 9 | NONE |
2.5MB | (2) 1M x 9 | (2) 256K x 9 |
2.5MB | (2) 256K x 9 | (2) 1M x 9 |
4MB | (2) 1M x 9 | (2) 1M x 9 |
8MB | (2) 4M x 9 | NONE |
8.5MB | (2) 4M x 9 | (2) 256K x 9 |
8.5MB | (2) 256K x 9 | (2) 4M x 9 |
10MB | (2) 4M x 9 | (2) 1M x 9 |
10MB | (2) 1M x 9 | (2) 4M x 9 |
16MB | (2) 4M x 9 | (2) 4M x 9 |
My Books
