FLASHPOINT LW HOST ADAPTER Hard Disk/Floppy Controller Settings and Configuration
BUSLOGIC, INC.
FLASHPOINT LW HOST ADAPTER
Data Bus | 32-bit PCI |
Card Size | Half-length, half-height card |
Hard Drives supported | Up to 7 SCSI or 15 Wide SCSI devices |
Floppy drives supported | None |
CONNECTIONS | |||
Function | Location | Function | Location |
68-pin SCSI connector - external | CN1 | 50-pin SCSI connector - internal | CN3 |
68-pin SCSI connector - internal | CN2 | LED connector | LED |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Unidentified | On | Activity detected |
LED1 | Unidentified | Off | Activity not detected |
LED2 | Green | On | Low termination enabled |
LED2 | Green | Off | Low termination disabled |
LED3 | Green | On | High termination enabled |
LED3 | Green | Off | High termination disabled |
TECHNICAL NOTES |
Note: The FlashPoint LW host adapter automatically configures its own termination according to its placement within the SCSI bus. The low termination LED indicates that bits 0-7 of SCSI bus are terminated on the board. The high termination LED indicates that bits 8-15 of SCSI bus are terminated. Note: Only two connectors may be used at one time. |
My Books
