IDE100 Hard Disk/Floppy Controller Settings and Configuration
BOCA RESEARCH, INC.
IDE100
Data bus: | 16-bit ISA |
Size: | Half-length, half-height card |
Hard drive supported: | Two IDE(AT) drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB drives |
CONNECTIONS | |
Function | Location |
40-pin primary IDE(AT) connector | J1 |
34-pin cable connector - floppy drive | J2 |
4-pin connector - drive active LED | J3 |
USER CONFIGURABLE SETTINGS | |||
| Function | Location | Setting | |
| » | IDE(AT) interface is primary | J4A | Pins 1 & 2 closed |
| IDE(AT) interface is secondary | J4A | Pins 2 & 3 closed | |
| » | IDE(AT) IRQ 14 select | J4B | Pins 1 & 2 closed |
| IDE(AT) IRQ 15 select | J4B | Pins 2 & 3 closed | |
| » | IDE(AT) interface is enabled | J4C | Pins 1 & 2 closed |
| IDE(AT) interface is disabled | J4C | Pins 2 & 3 closed | |
| » | Floppy drive interface enabled | J4D | Pins 1 & 2 closed |
| Floppy drive interface disabled | J4D | Pins 2 & 3 closed | |
My Books
