IDE PLUS (VER. 3) Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
9-pin serial port - external	CN1
25-pin parallel port (LPT1/2) - external	CN2
10-pin serial port (COM2/4) - internal	CN3
40-pin IDE (AT) Interface connector	CN4
34-pin control cable connector - floppy drive	CN5
4-pin connector - drive active LED	CN6

USER CONFIGURABLE SETTINGS
Function	Location	Setting
Serial port 1 - COM1	JP7/B	pins 1 & 2 closed
Serial port 1 - COM2	JP7/B	pins 2 & 3 closed
Serial port 1 - COM3	JP7/B	pins 4 & 5 closed
Serial port 1 - COM4	JP7/B	pins 5 & 6 closed
Serial port 1 - IRQ7	JP7/B	pins 7 & 8 closed
Serial port 1 - IRQ5	JP7/B	pins 8 & 9 closed
Serial port 1 - IRQ4	JP7/B	pins 10 & 11 closed
Serial port 1 - IRQ3	JP7/B	pins 11 & 12 closed
Serial port 2 - COM1	JP7/A	pins 1 & 2 closed
Serial port 2 - COM2	JP7/A	pins 2 & 3 closed
Serial port 2 - COM3	JP7/A	pins 4 & 5 closed
Serial port 2 - COM4	JP7/A	pins 5 & 6 closed
Serial port 1 - IRQ7	JP7/A	pins 7 & 8 closed
Serial port 1 - IRQ5	JP7/A	pins 8 & 9 closed
Serial port 1 - IRQ4	JP7/A	pins 10 & 11 closed
Serial port 1 - IRQ3	JP7/A	pins 11 & 12 closed
Parallel port address - 378h	JP8	pins 1 & 2 closed
Parallel port address - 278h	JP8	pins 2 & 3 closed
Parallel port IRQ7	JP8	pins 4 & 5 closed
Parallel port IRQ5	JP8	pins 5 & 6 closed