EXPRESSPCI-PSCd Hard Disk/Floppy Controller Settings and Configuration
ATTO TECHNOLOGY, INC.
EXPRESSPCI-PSCd
Card Type | Hard drive controller card |
Processor | RISC |
Hard Drives supported | Up to 15 Ultra/Wide SCSI Differential devices |
Floppy drives supported | None |
Data Bus | 32-bit PCI |
Card Size | Half-length, full-height card |
RAID levels supported | 0 |
CONNECTIONS | |||
Function | Location | Function | Location |
50-pin SCSI connector - internal | J1 | 4-pin connector - drive active LED | J3 |
68-pin SCSI connector - external | J2 | 68-pin SCSI connector - internal | J4 |
TERMINATION CONFIGURATION | ||||
Internal Devices | External Devices | RN1 | RN2 | RN3 |
Wide | Wide | Removed | Removed | Removed |
None | Wide | Installed | Installed | Installed |
Wide | None | Installed | Installed | Installed |
Narrow | None | Installed | Installed | Installed |
None | Narrow | Installed | Installed | Installed |
Narrow | Wide | Removed | Removed | Installed |
Wide | Narrow | Removed | Removed | Installed |
Narrow | Narrow | Removed | Removed | Installed |
MISCELLANEOUS TECHNICAL NOTES |
Only two SCSI connectors (J1&J2, J2&J3 or J3&J1) can be used simultaneously. All three SCSI connectors cannot be used at one time. |
My Books
