QUICK TECHNOLOGY, INC. Hard Disk/Floppy Controller Settings and Configuration

Data bus:

32-bit VL-Bus

Size:

Three/quarter-length, half-height card

Hard drive supported:

Four IDE(AT) interface devices

Floppy drives supported:

Two 360KB, 720KB, 1.2MB, 1.44MB or 2.88MB drives

CONNECTIONS

Function

Location

40-pin connector - primary IDE(AT) interface

J1

40-pin connector - secondary IDE(AT) interface

J2

34-pin floppy drive controller

J3

10-pin serial port 2 - internal

J4

16-pin game port

J5

10-pin (internal)/9-pin (external) serial port 1

J6

25-pin parallel port - external

J7

4-pin connector - drive active LED

JP1

USER CONFIGURABLE SETTINGS

» Function

Location

Setting

»

IDE I/O address is AD4h/AD8h/ADCh

SW1/4

off

»

IDE I/O address is B4h/B8h/BCh

SW1/4

on

BASE I/O ADDRESS

» Address

SW1/1

SW1/2

SW1/3

»

C8000h

off

off

off

»

CC000h

off

off

on

»

D0000h

off

on

off

»

D4000h

off

on

on

»

D8000h

on

off

off

»

DC000h

on

off

on

»

E0000h

on

on

off

»

Disabled

on

on

on