DUPLIDISK PCI Hard Disk/Floppy Controller Settings and Configuration

Card Type	Hard drive controller card
Hard Drives supported	Two IDE (AT) drives
Floppy drives supported	None
Data Bus	32-bit PCI
Card Size	Half-length, half-height card

CONNECTIONS
Function	Location	Function	Location
Unidentified	CN1	40-pin mirrored IDE(AT) connector	CN3
40-pin primary IDE(AT) connector	CN2	40-pin host IDE(AT) connector	CN4

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	Drive installed on the current channel
LED1	Red	On	Drive not installed on the current channel
LED1	Orange	On	Drive activity
LED2	Green	On	Drive installed on the current channel
LED2	Red	On	Drive not installed on the current channel
LED2	Orange	On	Drive activity
LED3	Green	On	Drives are in mirror mode
LED3	Red	On	Drives are in single mode

DIAGNOSTIC SPEAKER
Speaker	Status	Condition
SPK1	Short beep during power on	Successful boot up
SPK1	Second beep	DupliDisk running in single mode
SPK1	Continuous beep	Drive failure

SWITCH FUNCTION
Switch	Status	Condition
SW1	On	Diagnostic speaker on
SW1	Off	Diagnostic speaker off