DUPLIDISK Hard Disk/Floppy Controller Settings and Configuration

Processor	Unidentified
Data Bus	8-bit ISA (for power and setup only)
Card Size	Half-length, half-height card
Hard Drives supported	Four EIDE/IDE (AT) drives
Floppy drives supported	None
RAID levels supported	1

CONNECTIONS
Function	Location	Function	Location
2-pin connector - primary drive active LED	D1	40-pin primary IDE(AT) connector	JP2
2-pin connector - mirror drive active LED	D2	40-pin IDE(AT) connector - host IDE interface to DupliDisk	JP3
40-pin mirror IDE(AT) connector	JP1	9-pin serial port 1 - external	P1

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	JP10	Reserved

BIOS SEGMENT ADDRESS CONFIGURATION
Segment Address		JP4/1	JP4/2	JP4/3	JP4/4
»	C800h-CBFFh	Closed	Open	Closed	Closed
	CC00h-CEFFh	Closed	Open	Open	Closed
	D000h-D3FFh	Open	Closed	Closed	Closed
	D400h-D7EEh	Open	Closed	Open	Closed
	D800h-DBFFh	Open	Open	Closed	Closed
	DC00h-DEFFh	Open	Open	Open	Closed
	Disabled	Open	Open	Open	Open