MINIMODULE/F1 Hard Disk/Floppy Controller Settings and Configuration
AMPRO COMPUTERS, INC.
MINIMODULE/F1
Card Type | Hard drive controller card |
Hard Drives supported | Two IDE (AT) drives |
Floppy drives supported | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
Data Bus | PC/104 Version 2 |
Form-factor | Compact PC/104 |
CONNECTIONS | |||
Function | Location | Function | Location |
PC/104 bus | CN4 | 40-pin IDE(AT) connector | J7 |
34-pin cable connector - floppy drive | J3 | 44-pin IDE(AT) connector | J8 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | IDE(AT) interface enabled | W1/A | Closed |
IDE(AT) interface disabled | W1/A | Open | |
| » | Floppy drive interface enabled | W1/B | Closed |
Floppy drive interface disabled | W1/B | Open | |
| » | Precomp value enabled | W1/C | Closed |
Precomp value disabled | W1/C | Open | |
| » | Factory configured - (drive type) | W1/D | Closed |
| » | Factory configured - do not alter | W2 | Unidentified |
My Books
