ASC-86 (REV. 1), ASC-86 (REV. 2) Hard Disk/Floppy Controller Settings and Configuration

Card Type	Hard drive controller card
Hard Drives supported	Up to 7 SCSI devices
Floppy drives supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Data Bus	16-bit ISA
Card Size	Half-length, full-height card

CONNECTIONS
Function	Location	Function	Location
34-pin cable connector - floppy drive	CN1	Terminating resistors	RN1-RN3
50-pin SCSI connector - external	CN2

USER CONFIGURABLE SETTINGS
Function	Location	Setting
Floppy drive interface enabled	JP3	Closed
Floppy drive interface disabled	JP3	Open

SEGMENT ADDRESS SELECTION
Setting	JP1	JP2
CC00h	Open	Open
D000h	Closed	Open
D800h	Open	Closed
DC00h	Closed	Closed
Note: Jumpers JP1 and JP2 may be aligned horizontally on some Revision 1 Boards.