BUSMASTER FAST-SCSI DCB-EISA Hard Disk/Floppy Controller Settings and Configuration
ADVANCED DIGITAL INFORMATION CORPORATION
BUSMASTER FAST-SCSI DCB-EISA
Data bus: | 32-bit, EISA |
Size: | Full-length, full-height card |
Hard drive supported: | Up to seven SCSI devices |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB drives |
CONNECTIONS | |
Function | Location |
4-pin-connector - drive active LED | J1 |
34-pin control cable connector - floppy drive | J2 |
50-pin SCSI connector - internal | J3 |
50-pin SCSI connector - external | J4 |
USER CONFIGURABLE SETTINGS | ||||
Function | Location | Setting | ||
» | Floppy drive enabled | W8 | closed | |
| Floppy drive disabled | W8 | open | |
| Floppy drive enabled | J3 | pins 41 & 42 closed | |
| Floppy drive disabled | J3 | pins 41 & 42 open | |
| Note (1):The floppy drive controller can be enabled any one of three ways: (a) close jumper W8, or (b) close pins 41 & 42 of connector J3, or (c) select the floppy disk controller enabled option in the EISA configuration file. Note (2):To disable the floppy disk controller, all three of the above options must be disabled: (a) open jumper W8, and (b) open pins 41 & 42 of connector J3, and (c) select the floppy disk controller disabled option in the EISA configuration file. | |||
My Books
