MULTI-I/O CARD Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE(AT) drives
Floppy drives supported:	Two 360KB or 1.2MB drives

CONNECTIONS
Function	Location
40-pin IDE(AT) connector	CN1
34-pin cable connector - floppy drive	CN2
16-pin game port	CN3
10-pin serial port 2 - internal	CN4
9-pin serial port 1 - external	CN5
25-pin parallel port - external	CN6

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Serial port 1 IRQ 4 select	JP1	pins 2 & 3 closed
	Serial port 1 IRQ 3 select	JP1	pins 1 & 2 closed
»	Serial port 2 IRQ 3 select	JP2	pins 1 & 2 closed
	Serial port 2 IRQ 4 select	JP2	pins 2 & 3 closed
»	Parallel port IRQ 7 select	JP3	pins 2 & 3 closed
	Parallel port IRQ 5 select	JP3	pins 1 & 2 closed
»	Factory configured - do not alter	JP4	N/A
»	IRQ 14 buffering disabled	JP16	pins 2 & 3 closed
	IRQ 14 buffering enabled	JP16	pins 1 & 2 closed

PARALLEL PORT ADDRESS SELECTION
LPT		JP6	JP9
»	LPT1 (378h)	pins 1 & 2 closed	pins 1 & 2 closed
	LPT2 (278h)	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORTS ADDRESS SELECTION
COM		JP7	JP8
»	COM1(3F8h) / COM2(2F8h)	pins 1 & 2 closed	pins 1 & 2 closed
	COM2(2F8h) / COM3(2E8h)	pins 2 & 3 closed	pins 1 & 2 closed
	COM3(2E8h) / COM4(2E0h)	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed