ADLIN ENGINEERING
MAYTRONICS MODEL 891010
Data bus: 16-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two IDE Interface (AT) drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives
CONNECTIONS | |
40-pin IDE Interface (AT) connector | CN1 |
34-pin data cable connector-floppy drives | CN2 |
4-pin connector-drive active LED | CN3 |
5-pin connector-DC power | CN4 |
USER CONFIGURABLE JUMPERS | |||
Function | Location | Setting | |
» | Floppy drive port address is 3F0-3F7h | JP1 | pins 1 & 2 closed |
Floppy drive port address is 370-377h | JP1 | pins 2 & 3 closed | |
» | Hard drive port address is 1F0-1F7h | JP2 | pins 1 & 2 closed |
Hard drive port address is 170-177h | JP2 | pins 2 & 3 closed | |
» | Hard drive enabled | JP3 | pins 2 & 3 closed |
Hard drive disabled | JP3 | pins 1 & 2 closed | |
» | I/O Channel Ready output on Interface pin 27 | JP4 | pins 1 & 2 closed |
I/O Channel Ready output on Interface pin 21 | JP4 | pins 2 & 3 closed | |
» | IRQ14 connected to bus | JP5 | pins 1 & 2 closed |
IRQ14 is buffered | JP5 | pins 2 & 3 closed |