AHA-1510 Hard Disk/Floppy Controller Settings and Configuration
ADAPTEC, INC.
AHA-1510
Data bus: | 16-bit, ISA |
Size: | Half-length, full-height card |
Hard drives supported: | Up to seven SCSI devices |
Floppy drives supported: | None |
CONNECTIONS | |
Function | Location |
50-pin SCSI cable connector-internal | CN1 |
50-pin SCSI cable connector-external | CN2 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | I/O port address 340h | J9/jumper 5 | open |
I/O port address 140h | J9/jumper 5 | closed | |
Note:If the secondary address, 140h, is selected, the option must be set accordingly in ASPI.SYS. | |||
INTERRUPT REQUEST | |||||
Select | J9/jumper 1 | J9/jumper 2 | J9/jumper 3 | J9/jumper 4 | |
| » | IRQ11 | open | closed | open | open |
IRQ12 | closed | open | open | open | |
IRQ10 | open | open | closed | open | |
IRQ9 | open | open | open | closed | |
MISCELLANEOUS TECHNICAL NOTES |
The SCSI Disconnection, SCSI Address, SCSI Parity, Sync. Negotiation, I/O Port Address, and Data Transfer Mode options are set by the software driver, ASPI.SYS. |
My Books
