AHA-2742W, AHA-2744W Hard Disk/Floppy Controller Settings and Configuration
ADAPTEC, INC.
AHA-2742W, AHA-2744W
Data bus: | 32-bit EISA |
Size: | Three/quarter-length, full-height card |
Hard drive supported: | Up to fifteen SCSI devices |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
4-pin connector - drive active LED | J2 |
34-pin floppy drive connector | J3 |
68-pin wide SCSI connector - internal | J4 |
50-pin SCSI connector - internal | J5 |
68-pin wide SCSI connector - external | J6 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Floppy drive controller enabled | J1 | closed |
| Floppy drive controller disabled | J1 | open | |
MISCELLANEOUS TECHNICAL NOTES |
Only single-ended SCSI devices can be connected to 2742W. Only two of the three SCSI connector can be used at any given time. |
My Books
