AHA-2944UW Hard Disk/Floppy Controller Settings and Configuration
ADAPTEC, INC.
AHA-2944UW
Card Type | Hard drive controller card |
Hard Drives supported | Up to 15 SCSI devices |
Floppy drives supported | None |
Data Bus | 32-bit PCI |
Card Size | Half-length, full-height card |
CONNECTIONS | |||
Function | Location | Function | Location |
68-pin SCSI connector - external | CN1 | 50-pin SCSI connector - internal | CN3 |
68-pin SCSI connector - internal | CN2 | 4-pin LED connector | CN4 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | Auto termination SCSI channel 0-7 enabled | J4 | Closed |
Auto termination SCSI channel 0-7 disabled | J4 | Open | |
| » | Auto termination SCSI channel 8-15 enabled | J2 | Closed |
Auto termination SCSI channel 8-15 disabled | J2 | Open | |
DIAGNOSTIC LED(S) |
Note: The function of LED1 is unidentified. |
My Books
