PARADISE VGA PLUS 16 video card Settings and Configuration
WESTERN DIGITAL CORPORATION
PARADISE VGA PLUS 16
Category | Video |
Video Types Supported | VGA |
Video Processor | WD PVGA1A |
Highest Resolution Supported | 800 x 600 |
Data Bus Type | 16-bit ISA |
Memory Type | DRAM |
Maximum Onboard Memory | 256KB |
CONNECTIONS | |||
Purpose | Location | Location | Purpose |
15-pin analog video port | CN1 | VGA feature connector | CN2 |
FACTORY CONFIGURED - DO NOT ALTER | |
Jumper/Switch | Position |
W2 | Pins 1 & 2 closed |
SW1/3 | Off |
MANUAL 16-BIT BIOS CONFIGURATION | ||
Setting | W1 | |
| » | Initial setup and normal operation | Closed |
Note:W1 should remain in the closed position unless the 16TEST program has been run and it recommends removing the jumper. | ||
DISPLAY TIMING SELECTION | ||
Timing | SW1/1 | |
| » | Standard PS/2 compatible display timing | Off |
Special multi-frequency display timing | On | |
VGA MODE SWITCHING CONFIGURATION | ||
Mode | SW1/2 | |
| » | PS/2 style | On |
PC/AT style | Off | |
AUTOSENSE SELECTION | ||
Mode | SW1/4 | |
| » | Autosense for 16-bit BIOS enabled | On |
Autosense disabled, force 8-bit BIOS | Off | |
My Books
