VGA SMT1024 / VGA 1024 video card Settings and Configuration
UNIDENTIFIED
VGA SMT1024 / VGA 1024
Category | Video |
Video Types Supported | XVGA |
Video Processor | WD9DC00 |
Highest Resolution Supported | 1024 X 768 |
Data Bus Type | 16-bit ISA |
Memory Type | DRAM |
Maximum Onboard Memory | 512KB |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
15-pin analog video port | CN1 | VESA Feature connector | CN2 |
FACTORY CONFIGURED SETTINGS | |
Switch | Setting |
SW1/3 | Off |
MANUAL 16-BIT BIOS CONFIGURATION | ||
Setting | JP1 | |
| » | Initial setup and normal operation | Closed |
Note:JP1 should remain in the closed position unless the 16TEST program has been run and it recommends removing the jumper. | ||
MONITOR TIMING SELECTION | ||
Timing | SW1/1 | |
| » | Standard PS/2 frequency | Off |
Multi-frequency display | On | |
MONITOR TYPE CONFIGURATION | ||
Type | SW1/2 | |
| » | PS/2 | On |
PC/AT | Off | |
BIOS WIDTH CONFIGURATION | ||
Width | SW1/4 | |
| » | Autodetect enabled | On |
Force 8-bit | Off | |
VIDEO MEMORY CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
256KB | (8) 41256 | NONE |
512KB | (8) 41256 | (8) 41256 |
My Books
