ASI-WINJET (VER. 1.0) video card Settings and Configuration
SEANIX TECHNOLOGY, INC.
ASI-WINJET (VER. 1.0)
Category | Video |
Video Types Supported | XVGA |
Video Processor | Western Digital WD90C31A |
Highest Resolution Supported | 1280 x 1024 |
Data Bus Type | 16-bit ISA |
Memory Type | DRAM |
Maximum Onboard Memory | 1MB |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Video out | J1 | VGA feature connector | JP3 |
VERTICAL RETRACE SELECTION FOR 800 X 600 | |||
Rate | SW1/1 | SW1/2 | |
» | 56Hz | Off | Off |
| 56Hz | On | On |
| 60Hz | Off | On |
| 72Hz | On | Off |
VERTICAL RETRACE SELECTION FOR 1024 X 768 | |||
Rate | SW1/3 | SW1/4 | |
» | Interlaced | Off | Off |
| Interlaced | On | On |
| 60Hz non-interlaced | Off | On |
| 70Hz non-interlaced | On | Off |
HORIZONTAL RETRACE SELECTION | ||
Rate | JP1 | |
» | 31.5KHz | Pins 3 & 4 open |
| 40KHz | Pins 3 & 4 closed |
WAIT STATE CONFIGURATION | ||
Wait States | JP2 | |
» | 0 | Closed |
| >0 | Open |
ADDRESS LATCH CONFIGURATION | ||
Setting | JP6 | |
» | Non-80286 systems | Pins 1 & 2 closed |
| 80286 systems | Pins 2 & 3 closed |
FACTORY CONFIGURED - DO NOT ALTER | |
Jumper | Setting |
JP5 | Open |
JP1 pins 1 & 2 | Open |
My Books
