PRODESIGNER VGA/PRODESIGNER VGA + video card Settings and Configuration
ORCHID TECHNOLOGY
PRODESIGNER VGA/PRODESIGNER VGA +
Category | Video |
Video Types Supported | VGA |
Video Processor | Unidentified |
Highest Resolution Supported | 640 x 480 |
Data Bus Type | 16-bit ISA |
Memory Type | DRAM |
Maximum Onboard Memory | 256KB (VGA)/512KB (VGA+) |
CONNECTIONS | |
Purpose | Location |
15-pin analog video port | CN1 |
NMI SELECT | |
Setting | JP1 |
NMI enable | Closed |
NMI disable | Open |
Note:If the Auto detect feature is used (Software) then this jumper must be enabled. On certain Compaq computers this causes a failure during boot up. | |
BIOS BUS SELECT | |
Setting | JP2 |
8-Bit BIOS | Pins 1 & 2 closed |
16-Bit BIOS | Pins 2 & 3 closed |
Note: Under newer revisions of the card JP2 is not functional. | |
My Books
