HIGH SPEED QUAD MODEL DEC-24-SE, DEC-24-DS video card Settings and Configuration
OPTIVISION, INC.
HIGH SPEED QUAD MODEL DEC-24-SE, DEC-24-DS
Card Type | MPEG card |
Processor | i960 |
Processor Speed | Unidentified |
Maximum Onboard Memory | Unidentified |
Video Chipset | C-Cube CL9100 |
Video Types Supported | NTSC, PAL, film |
Formats Supported | MPEG-1, MPEG-2 |
Resolutions Supported | SIF, half D-1, full D-1 |
I/O Options | Audio line out, composite video out, D-1 digital video out, serial port |
Data Bus | SCSI-2 Fast/Wide (Differential on DEC-24-DS) |
CONNECTIONS | |||
Function | Label | Function | Label |
68-pin SCSI-2 connector - external | CN1 | Diagnostic serial port | CN12 |
68-pin SCSI-2 connector - external | CN2 | SCSI ID switch | SW1 |
Composite video channel 1 out | CN3 | Audio line 1 out - see pinout below | SC1 |
Composite video channel 2 out | CN4 | Audio line 2 out - see pinout below | SC2 |
Composite video channel 2 out | CN5 | Audio line 3 out - see pinout below | SC3 |
Composite video channel 4 out | CN6 | Audio line 4 out - see pinout below | SC4 |
AC power in | CN7 | ||
Note:The exact location of CN12 is unidentified. It is near LED10 - LED12 inside the adapter's case. | |||
SC1 - SC4 PINOUT | |||
Function | Screw | Function | Screw |
Left channel positive signal | 1 | Right channel positive signal | 4 |
Left channel common | 2 | Right channel common | 5 |
Left channel negative signal | 3 | Right channel negative signal | 6 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Unidentified | On | Channel 1 is idle |
LED1 | Unidentified | Off | Channel 1 is not idle |
LED2 | Green | On | Channel 1 is receiving data |
LED2 | Green | Off | Channel 1 is not receiving data |
LED3 | Unidentified | On | Error condition detected on channel 1 or no card installed in channel 1 |
LED3 | Unidentified | Off | Channel 1 is operating normally |
LED4 | Unidentified | On | Channel 2 is idle |
LED4 | Unidentified | Off | Channel 2 is not idle |
LED5 | Green | On | Channel 2 is receiving data |
LED5 | Green | Off | Channel 2 is not receiving data |
LED6 | Unidentified | On | Error condition detected on channel 2 or no card installed in channel 2 |
LED6 | Unidentified | Off | Channel 2 is operating normally |
LED7 | Unidentified | On | Channel 3 is idle |
LED7 | Unidentified | Off | Channel 3 is not idle |
LED8 | Green | On | Channel 3 is receiving data |
LED8 | Green | Off | Channel 3 is not receiving data |
LED9 | Unidentified | On | Error condition detected on channel 3 or no card installed in channel 3 |
LED9 | Unidentified | Off | Channel 3 is operating normally |
LED10 | Unidentified | On | Channel 4 is idle |
LED10 | Unidentified | Off | Channel 4 is not idle |
LED11 | Green | On | Channel 4 is receiving data |
LED11 | Green | Off | Channel 4 is not receiving data |
LED12 | Unidentified | On | Error condition detected on channel 4 or no card installed in channel 4 |
LED12 | Unidentified | Off | Channel 4 is operating normally |
LED13 | Green | Blinking | Adapter is functioning normally |
LED13 | Green | Off | Adapter is not functioning normally |
LED14 | Unidentified | On | Hardware error detected |
LED14 | Unidentified | Off | Hardware error not detected |
My Books
