MAXEGA video card Settings and Configuration

Card Type	Video card
Video Chip Set	Unidentified
Maximum Video Memory	256KB
Video Types Supported	MDA, CGA, EGA
Highest Resolution Supported	800 x 600
Data Bus	8-bit ISA

CONNECTIONS
Function	Label	Function	Label
Feature connector	CN1	9-pin digital video port	CN3
Light pen connector	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	EGA monitor	P1	Pins 1& 2 closed
	Monochrome or CGA monitor	P1	Pins 2 & 3 closed
»	Expansion slot 8 disabled	P3/C	Pins 1& 2 closed
	Expansion slot 8 enabled	P3/C	Pins 2 & 3 closed
»	Oscillator enabled	P4	Pins 1 & 2 closed
	Oscillator disabled	P4	Pins 2 & 3 closed
»	Factory configured - do not alter	SW1/7	Off

AUTOMODE SELECTION
Setting		P3/B	P3/D	SW1/8
»	Automode disabled	Pins 2 & 3 closed	Pins 1 & 2 closed	Off
	Automode enabled	Pins 1 & 2 closed	Pins 2 & 3 closed	On

MONITOR CONFIGURATION SELECTION
Mode		SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6
»	EGA monitor (Hi res EGA mode)	On	Off	Off	On	Off	Off
	Monochrome monitor (EGA mode)	On	On	Off	On	Off	Off
	EGA monitor (Low res EGA mode)	Off	Off	Off	On	Off	Off
	CGA monitor (Low res EGA mode)	On	On	On	Off	Off	Off
	CGA monitor (40x25 low res mode)	Off	On	On	Off	Off	Off
	EGA monitor (CGA mode)	On	Off	Off	On	Off	On
	CGA monitor (CGA mode	On	On	On	Off	Off	On
	EGA monitor (Hercules mode)	On	Off	Off	On	On	Off
	Monochrome monitor (Hercules mode)	On	On	Off	On	On	Off

SERIAL PORT ADDRESS SELECTION
Setting		P3/A
	2XXh	Pins 1 & 2 closed
»	3XXh	Pins 2 & 3 closed