WINX video card Settings and Configuration
KASAN ELECTRONICS CO., LTD.
WINX
Category | Video |
Video Types Supported | XVGA |
Video Processor | Tseng Labs ET-4000/32P |
Highest Resolution Supported | 1280 x 1024 |
Data Bus Type | 32-bit PCI |
Memory Type | DRAM |
Maximum Onboard Memory | 2MB |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
15-pin analog video port | CN1 | Imagne port connector | CN3 |
Feature connector | CN2 | 3D jack | J1 |
INTERRUPT CONFIGURATION | ||
| IRQ 2/9 | JP1 | |
| » | Enabled | Open |
| Disabled | Closed | |
PCI ID DETECTION CONFIGURATION | ||
| Setting | JP3 | |
| » | Detected at start up | Pins 1 & 2 closed |
| Detected by ROM BIOS | Pins 2 & 3 closed | |
MEMORY CLOCK CONFIGURATION | ||
| Setting | JP4 | |
| » | 50MHz | Pins 1 & 2 closed |
| 44.7MHz | Pins 2 & 3 closed | |
BASE I/O ADDRESS SELECTION | ||
| Address | JP5 | |
| » | 258h, 259h | Pins 2 & 3 closed |
| 358h, 359h | Pins 1 & 2 closed | |
DRAM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
1MB | (2) 256K x 16 | NONE |
2MB | (2) 256K x 16 | (2) 256K x 16 |
MISCELLANEOUS TECHNICAL NOTE |
The exact location of pin 1 on JP3, JP4 & JP5 is unidentified by the manufacturer. |
My Books
