MCG6618 V6 video card Settings and Configuration
JATON CORPORATION
MCG6618 V6
Card Type | Multi-I/O card |
Chip Set | Unidentified |
Maximum Onboard Memory | None |
I/O Options | Floppy drive interface, game port, light pen, mouse connector, parallel port, serial port (2), VGA port |
Data Bus | 8-bit ISA |
Floppy drives supported | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |||
Function | Label | Function | Label |
Floppy drive interface | CN1 | Mouse port | CN5 |
Serial port (1) interface | CN2 | Game port | CN6 |
Serial port (2) interface | CN3 | VGA port | CN7 |
Light pen connector | CN4 | 25-pin parallel port | CN8 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | Mouse port enabled | JP5 | Closed |
Mouse port disabled | JP5 | Open | |
| » | Parallel port enabled | JP6 | Closed |
Parallel port disabled | JP6 | Open | |
| » | Game port enabled | JP7 | Closed |
Game port disabled | JP7 | Open | |
| » | Serial port (1 or 2) COM1 enabled | JP12 | Closed |
Serial port (1 or 2) COM1 disabled | JP12 | Open | |
| » | Serial port (1 or 2) COM2 enabled | JP13 | Closed |
Serial port (1 or 2) COM2 disabled | JP13 | Open | |
| » | Floppy drive disabled | SW1/1 | On |
Floppy drive enabled | SW1/1 | Off | |
USER CONFIGURABLE SETTINGS (CON’T) | ||
Function | Label | Position |
Floppy drive B select 360KB or 720KB drives | SW1/2 | On |
Floppy drive B select 1.2MB or 1.44MB drives | SW1/2 | Off |
Floppy drive A select 360KB or 720KB drives | SW1/3 | On |
Floppy drive A select 1.2MB or 1.44MB drives | SW1/3 | Off |
Hard drive is present | SW1/4 | On |
Hard drive is not present | SW1/4 | Off |
MOUSE PORT INTERRUPT SELECTION | |||||
IRQ | JP1 | JP2 | JP3 | JP4 | JP18 |
2 | Closed | Open | Open | Open | Pins 1 & 2 closed |
3 | Open | Closed | Open | Open | Pins 3 & 4 closed |
4 | Open | Open | Closed | Open | Pins 5 & 6 closed |
5 | Open | Open | Open | Closed | Pins 7 & 8 closed |
Note: The exact location of pin 1 on JP18 is unidentified. | |||||
SERIAL PORT (1) CONFIGURATION | ||||
Setting | IRQ | JP11 | JP14 | |
| » | COM1 (3F8h) | 4 | Closed | Pins 1 & 2, 3 & 4 closed |
COM2 (2F8h) | 3 | Open | Pins 1 & 2, 5 & 6 closed | |
Note: The exact location of pin 1 on JP14 is unidentified. | ||||
SERIAL PORT (2) CONFIGURATION | ||||
Setting | IRQ | JP11 | JP14 | |
COM1 (3F8h) | 4 | Open | Pins 1 & 2, 3 & 4 closed | |
| » | COM2 (2F8h) | 3 | Closed | Pins 1 & 2, 5 & 6 closed |
Note: The exact location of pin 1 on JP14 is unidentified. | ||||
TIMER INTERRUPT SELECTION | |||
IRQ | JP15 | JP16 | JP17 |
2 | Closed | Open | Open |
4 | Open | Closed | Open |
5 | Open | Open | Closed |
VGA GRAPHIC CONFIGURATION | |
Setting | S1 |
Monochrome | On |
Color | Off |
MISCELLANEOUS TECHNICAL NOTE |
Note: The exact location of SW1 on the MCG6618 V6 board is unidentified. |
My Books
