20.015 What are the switch settings for the old Apple Serial Interface card?
Description
This article is from the Apple II Csa2 FAQ, by Jeff Hurlburt with numerous contributions by others.
20.015 What are the switch settings for the old Apple Serial Interface card?
The switch settings are as follows:
1 2 3 baud rate
on on on 110
off on on 134.5
on off on 300
off off on 1200
on on off 2400
off on off 4800
on off off 9600
off off off 19200
sw 4 off = enable delay after CR
5 6 line wt video
on on 40 enable
off on 72 disable
on off 80 disable
off off 132 disable
sw 7 off = enable LF after CR
By: Supertimer
Continue to:
My Books
