lotus

previous page: 18.009 Can anyone tell me how to connect a printer with a "Centronics interface" to my Apple II?
  
page up: Apple II Csa2 FAQs
  
next page: 18.011 What are the DIP switches on my Grappler+ for?

18.010 I bought a Grappler+ printer interface card at a swap meet. Where can I get a cable? What is the pin-out for the cable?




Description

This article is from the Apple II Csa2 FAQ, by Jeff Hurlburt with numerous contributions by others.

18.010 I bought a Grappler+ printer interface card at a swap meet. Where can I get a cable? What is the pin-out for the cable?

         The cable you need is the very common "Centronics cable". It is sold by
several Apple II vendors. The pin-out is shown below:

Grappler+ Pin Assignments
~~~~~~~~~~~~~~~~~~~~~~~~~
STB   1
D0    3
D1    5
D2    7
D3    9
D4    11
D5    13
D6    15
D7    17
ACK   19
BUSY  21
P.E.  23
SLCT  25
N/C   -
GND   all others
By: Mitchell Spector ----------------------------

 

Continue to:













TOP
previous page: 18.009 Can anyone tell me how to connect a printer with a "Centronics interface" to my Apple II?
  
page up: Apple II Csa2 FAQs
  
next page: 18.011 What are the DIP switches on my Grappler+ for?